Atlas TSD-DA28 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Atlas TSD-DA28에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas TSD-DA28 8 페이지. 2x8 balanced line distribution amplifier
Atlas TSD-DA28에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지)

페이지 인쇄

2x8 Distribution Amplifier

Rear Panel Description

TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm

pitch between pins.

1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for

an external 24VDC power supply (sold separately). Because of the TSD's low power consumption,

a single external power supply may power more than one TSD. Please refer to the specifications

on current requirements in milliamps to match with the appropriate power supply. Note: It is

acceptable to exceed the current requirements of the TSDs but NOT safe to use a power supply

that is below the current requirement of the device.

2. Balanced Line Input - Connects to a balanced line level source. Your connection must be mated

properly to the input connector or signal loss and/or noise may occur. Note: Unbalanced line level

inputs can be inserted with proper wire configuration by connecting the (G) and (-) terminals

together.

3. Balanced Line Output - Connections to provide output when an input signal is present for

connection to balanced line level devices. Your output connections must be connected properly to

the connectors or loss and/or noise may be introduced into the signal. Note: Unbalanced line level

devices can be used with proper wire configuration by connecting the (G) and (-) terminals

together.

4. Cable Management Retainer Points - Each TSD includes two cable retainer straps for securing

the included cable management retainers. Remove one of the rear panel screws, align the

panel hole with a retainer and firmly tighten the screws.

TSD-DA28

– 4 –

Speci cations are subject to change without notice.

Owner's Manual