Atlas Kaye AC-MGM2W 사용 설명서 - 페이지 5
{카테고리_이름} Atlas Kaye AC-MGM2W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Kaye AC-MGM2W 8 페이지. Wall mounted
Atlas Kaye AC-MGM2W에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)
페이지 인쇄
MOUNTING/INSTALLLA TION
OF THE FAN AND MAKING
THE ELECTRICAL
CONNECTIONS
Before touching a screw driver thoroughly
read these installation instructions.
Your new wall fan will require a grounded
electrical supply line of 120 volts AC, 60 Hz
circuit. The junction
box must be securely
anchored and capable of withstanding a load
of at least 45 Ibs.
WARNING/CAUTION:
wall junction box turn off power at service
panel.
1.
Attach junction box securely to building
structure. Use provided hardware. Caution:
Tighten screws well. (See Figure 1)
WARNING/CAUTION:
electrical shock, be sure that electricity to the
wall junction box and to the wall switch is
turned off at the main fuse box before wiring.
2. Verify that the set screws in decorative
canopy are fully retracted. Not retracting them
will cause unsightly scratches in the beautiful
finish of the goose neck during installation.
Leave the protective plastic sleeves in place
on the gooseneck of the fan. Carefully push
wires through the canopy and then slide the
canopy up the gooseneck to the bend with
wide section positioned towards wall (Fig. 2).
3. Thread wires through the barrel of the
hanger bracket, pulling them taut at the flat
end. Attach hanger bracket to the goose neck
carefully, aligning the x4 Allen screw holes.
Tighten the x4 Allen screws well.
Before installing new
To avoid
possible
4
Screws-.e-
e-
Side mount -.
wall junction box
Figure 1
Allen wrench
~
T
screws-+~~
Figure 2
.
.