Atlas Kaye AC-MGM2W 사용 설명서 - 페이지 8

{카테고리_이름} Atlas Kaye AC-MGM2W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Kaye AC-MGM2W 8 페이지. Wall mounted
Atlas Kaye AC-MGM2W에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)

페이지 인쇄

OPERATING THE WALL

CONTROL

Restore Power to Wall Fan.

The fan 3-speed

control

control the fan blade speed as follows:

0= Turns the fan off

1= High Speed

2= Medium Speed

3= Low Speed

B. ON-OFF Button:

This button is used to regulate the oscillating

operation.

CARE OF AND TROUBLESHOOTING YOUR FAN

1. Check hardware bi-yearly.

become loose over time. Check the support connections, brackets and blade attachments

twice a year. Make sure they are secure. It is not necessary to remove fan from the wall.

2. Clean your fan periodically.

years. Use only a lightly water-moistened, lint free cloth to avoid scratching the finish. Plated

finishes are sealed with lacquer to minimize discoloration or tarnishing. Do not let rain or

running water to come in contact with the fan. Rain or running water could damage the motor

or possibly cause an electrical shock.

3. There is no need to oil your fan. The motor has permanently lubricated bearings.

Fan makes a vibration

connection to the motor face plate.

5. Fan vibrates or makes grinding

Make sure that your fan head's set screw is counter-sunk into the bore hole in the flat part of

the motor shaft. Be careful that the blade brackets themselves are not bent in this process.

Do not operate your fan if it continues to vibrate. Contact your Atlas Fan Co purveyor if the

re-installation of the blades does not resolve the problem.

knob is used to

Because of the fan's natural movement some connections may

This will help to help maintain its new appearance over the

noise. Check to see that all screws are tight in the fan cage

noise as blades rotate. Uninstall and reinstall the blades.

Figure 8