Bose AM267565 사용자 설명서 - 페이지 31

{카테고리_이름} Bose AM267565에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose AM267565 34 페이지. Bose corporation user guide speaker am267565

Figure 34

Angling and turning used to

apply the paint twice

Steps for spray painting:

1. To prevent dirt or dried paint particles from blowing back into the grille perforations,

suspend the grille or place it on a wire screen.

2. Apply the paint to the grille surface at a 45˚ angle. Then rotate the grille by 180˚ and

repaint it at 45˚.

45˚

Tip: Piercing a perforation with a sharp implement to remove a clog can cosmetically

damage the grille and is not recommended. If paint clogs any of the grille perforations, blow

gently in that area to unclog it. If that does not work, immediately wash the grille with the

appropriate solvent. Make sure the grille is thoroughly dry before repainting.

The paint may feel dry in a few minutes. However, if alcohol has been added, it may take

several days to fully cure.

Painting the frame

You can use either latex or oil-based paints, which adhere to the speaker frame. However,

both can be easily scratched through careless handling.

Before you begin, protect the speaker cones by inserting the paint shield that came in the

carton. Then you can use the same conventional spray or roller equipment used to paint the

wall or ceiling.

Be careful so the paint does not puddle or run. You may want to use a brush for spreading

paint where needed.

AM267565_01_V.pdf May 13, 2003

45˚

180˚

Steps to Installing