Bose FreeSpace FS4SE 매뉴얼 - 페이지 8

{카테고리_이름} Bose FreeSpace FS4SE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace FS4SE 10 페이지.

Installation

Removing the Grille

The grille is secured to the loudspeaker by the grille lock. Disengage the grille lock by inserting a small tool through the grille perforation

(no larger than 1.5 millimeters in diameter). While depressing the grille lock, slide the grille away from the loudspeaker to detach it.

Note: The grille lock is located on the loudspeaker opposite of the tap switch. See the diagram below for the grille lock location.

Tap switch

Adjusting the Logo

The FreeSpace FS4SE comes with a pre-installed Bose logo for horizontal installations. The loudspeaker also comes with a separate logo

for vertical installations. To remove the logo, peal it away from the loudspeaker grille. To apply the vertical logo, find the center of the

grille and align the notches on the back of the logo with the grille perforation. Press to affix it to the loudspeaker grille.

Safety and Regulatory Compliance

The Bose FreeSpace FS4SE loudspeaker has passed testing and complies with the following specifications and uses:

Listed to ANSI/UL 1480-2016, CAN/ULC-S541

Fire Protective Signaling Use – UL Category UUMW/UUMW7, File Number S 3241. Control Number 42S9.

Not for use with DC-supervised systems.

Suitable for use outdoors in wet locations.

EN 54-24: 2008, Loudspeaker for Voice Alarm Systems for Fire Detection and Fire Alarm Systems for Buildings

Environmental: Type B (outdoor applications)

Suitable for installation using Class 1, Class 2, or Class 3 wiring methods in accordance with NFPA 70, National Electric Code, 2002, Article 640.

Suitable for use with fire alarm circuit wiring methods in accordance with NFPA 70, National Electric Code, 2002, Article 760.

NFPA 70, National Electric Code, 2002, Article 300-22 (c).

NFPA 90-A, 2002, Installation of Air Conditioning and Ventilation Systems, Paragraph 4.3.10.2.6.5.

EMC Directive 89/336/EEC and Article 10 (1) of the directive, EN50081-1 and EN50082-1 as signified by the CE mark.

The Bose FreeSpace FS4SE has been designed to the requirements defined in the following European regulatory specifications for combination systems:

British Standard Code of Practice BS 5839, Part 8, when used with the ceramic terminal block and thermal fuse.

Tested to IEC60268-5.

Nominal Coverage Angle (per UL 1480) Vertical: 115°/65° at –3 dB; 145°/40° at –6 dB

UL Sensitivity Wattage Tap Sound Pressure Level dBA at 3.1 meters (10 feet):

Wattage

CAN/ULC-S541

Canada

Tap

70 V

2.5 W

85.6 dBA

5 W

88.2 dBA

88.4 dBA

10 W

91.1 dBA

90.8 dBA

20 W

93.8 dBA

93.4 dBA

40 W

96.2 dBA

96.1 dBA

8 Ω

95.3 dBA

SPLs given are per the UL 1480 specified reporting method.

Frequency response:

Fire alarm (UL): 80 Hz to 17000 Hz

8 • English

Horizontal: 120°/60° at –3 dB; 145°/35° at –6 dB

Wattage

100 V

Tap

—

2.5 W

5 W

10 W

20 W

40 W

—

8 Ω

ANSI/UL 1480-2016

United States

70 V

100 V

79.3 dBA

—

81.9 dBA

82.3 dBA

84.8 dBA

87.6 dBA

90.1 dBA

90.2 dBA

90.3 dBA

—

2531

Bose Corporation

100 The Mountain Rd, Framingham, MA 01701

DOP 434849-10

EN 54-24: 2008

Loudspeaker for voice alarm systems for fire detection and fire

alarm systems for buildings

FreeSpace FS4SE

Provided options:

Type B

For DOP 434849-10, see pro.Bose.com/FS4SEDOP_UK

FreeSpace FS4SE • Installation Guide

PRO.BOSE.COM