Atlas Copco PHD 26 수리 지침 - 페이지 8

{카테고리_이름} Atlas Copco PHD 26에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco PHD 26 8 페이지.

Mounting the

Fit the bearing end plate (2). If necessary,

nosepiece

with aid of a plastic hammer.

Insert the washer. First insert a pair of disk

springs with the vault facing upward, then

one pair facing downward, and again one

pair facing upward. Insert another washer.

Fit the gasket. Mount the nosepiece (1)

and secure it with the Allan screw.

Test Run

Test run the machine and pay attention to noises.

Check the direction of rotation!

Let the machine run-in.

Carry out a percussion test.

Electrical Test

Perform an electrical test on the machine (see chapter Electrical and Mechanical Test Instructions).

Repair Instructions No. 162.11/95

PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)

PAGE