Atlas Copco PHE 3X 수리 지침 - 페이지 2
{카테고리_이름} Atlas Copco PHE 3X에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco PHE 3X 14 페이지.
페이지 인쇄Dismantling the
1 Removing the locking sleeve (2):
FIXTEC-
Fix the locking sleeve in a pulling off
Reception
device (3) and press it out (by using a
(only applicable
suitable sleeve (1)).
for PHE 3 X)
2 To remove the balls (4) (6 pieces):
depress the seal ring (6) and remove the
balls with aid of a magnet.
3 Remove the remaining parts:
- seal ring (6)
- outer spring (7)
- ejector ring (5)
- inner spring (8)
- washer (9)
Removing the
1 Removing the switch lever (4):
gear housing
Switch the lever to „0" and break it off
with aid of pliers (the lever is being
destroyed).
switch in a vice and break it off by
moving the machine to and fro. Remove
any broken parts from the machine!
2 Remove the four housing screws (1).
3 To remove the locking ring (2) (only
applicable for PHE 3 X): open the locking
ring on the spindle with aid of special
pliers (5) (4931 5990 57) and remove it
together with the gear housing (3).
Removing the
1 Remove the two screws (1).
spindle
2 Remove the straight pin (5).
3 Remove the planetary gear (6) and the
ring gear (7).
4 Remove the complete spindle sleeve (2)
from the cylinder.
Should this not be possible fix the
Repair Instruction No. 175.8/95
1
2
3
2
4
5
6
1 2
1
2
5
6
PHE 3, PHE 3X
7
8
9
3
5
4
3
4
7
8
PAGE
2
2
3
4