Bose ShowMatch SM20 사용 및 응용 매뉴얼 - 페이지 13

{카테고리_이름} Bose ShowMatch SM20에 대한 사용 및 응용 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose ShowMatch SM20 28 페이지. Deltaq array loudspeakers
Bose ShowMatch SM20에 대해서도 마찬가지입니다: 설치 및 안전 매뉴얼 (16 페이지)

페이지 인쇄

Corporate AV Example 2

A ground stack system is used to provide voice and music playback for a corporate function within a traditional hotel

ballroom. A ground-stack system provides voice and music playback for a corporate function within a traditional hotel

ballroom. The system has two ground stacks, one at the left of the stage, one at the right. Each contains four SM5

modules and two SMS118 subwoofers.

Ground Stack Arrays (x2)

Amplification

4x SM5 Module

1x ShowMatch Tour Rack

Subwoofer

2x SMS118

Corporate AV application 2

LEFT

RIGHT

SM5 100°

SMS118

Preset Guide

Arrays

Ground Stack 90 Hz HPF

Sub

SMS118 Sub 90 Hz LPF

PRO.BOSE.COM

SHOWMATCH TOUR RACK

Product Description

ShowMatch loudspeaker systems are compatible with the ShowMatch Tour Rack, which is available in 120-volt and 230-

volt versions. The ShowMatch Tour Rack is a fundamental system building block and has been engineered to support a

variety of system configurations.

US rack

European rack

ShowMatch Tour Rack Configuration

The ShowMatch Tour Rack ships ready to power a ShowMatch system with input routing and loudspeaker processing

preconfigured, allowing for "plug and play" operation for a system.

Input Priority and Routing

The system is preconfigured to auto-detect signal at the analog, AES and Dante® input points and will automatically

switch to the backup when input signal is lost. The PowerSoft X4D platform offers four input-signal-detection points:

Analog, AES, Dante Ch. 1-8, and Dante Ch. 9-16. Default input routing is configured for a basic system setup comprised

of Left, Right, Sub, and Fill input signals.

The following charts describe the input priority and routing that is preconfigured within the ShowMatch Tour Rack:

Input Priority

Priority

Input

Analog

AES

Dante Ch 1-8

Dante Ch 9-16

Mode:

Auto Detection

Initial System Configuration

The initial system configuration is for a stereo system comprised of two six-module arrays with a total of 8 SMS118

subwoofers. A PowerSoft ArmoníaPlus project file is available for download at

www.Armonia.powersoft.it/download-Armonia/, which can be used to control the operation of the ShowMatch Tour

Rack. If the file is not available, connecting to the system will provide full operational control, however the devices

shown in the Design workflow will not be present.

NOTE: System outputs are muted in the initial configuration of the ShowMatch Tour Rack. Outputs can be unmuted

using the ArmoníaPlus software or by pressing the channel mute/unmute on the front panel of the PowerSoft X4D

amplifier. See the PowerSoft X4D Owner's Manual for additional details.

PRO.BOSE.COM

Each ShowMatch Tour Rack includes:

Power Distribution Unit

Three (3) PowerSoft X4D amplifiers

Cisco SG350-28 Managed Network Switch

AES Splitter & Signal Distribution Unit

Loudspeaker Distribution Unit

Routing

System

Input Channel

Left

Right

Sub

Fill