Bose SoundLink Bluetooth speaker III 소유자 매뉴얼 - 페이지 13
{카테고리_이름} Bose SoundLink Bluetooth speaker III에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose SoundLink Bluetooth speaker III 20 페이지. Charging cradle
Bose SoundLink Bluetooth speaker III에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 자주 묻는 질문 (4 페이지), 자주 묻는 질문 (2 페이지)
페이지 인쇄
Connecting a device using the AUX connector
You can use your speaker with any device that features a headphone or audio
output. This feature requires using a stereo audio cable with a 3.5 mm plug on
one end to connect to the AUX IN input
available for purchase at electronics stores.
To use the AUX IN connector:
1.
Plug the cable from your audio device into the AUX IN connector
back of the speaker.
2.
Press Power
AUX
3.
Press
on the speaker.
4.
Adjust the volume on the connected device to near maximum, then use
the speaker volume buttons to adjust the volume level.
Notes:
If the connected device stops playing audio for 30 minutes, the speaker
automatically turns off to conserve battery power.
The SERVICE connector on the back of the speaker is only for software updates.
It cannot be used to connect an audio device.
on the speaker.
on the speaker. This type of cable is
Operation
on the
English - 13