Bose RoomMatch 설치 매뉴얼 - 페이지 8

{카테고리_이름} Bose RoomMatch에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose RoomMatch 24 페이지.

Designing Arrays

Figure 6. Working Load Limit, Single-Point, 10:1 Design Factor (In Accordance with ANSI E1.8-2005

WARNING! Never apply a force that exceeds the Working Load Limit of any of the loudspeaker modules, rigging com-

ponents, or complete loudspeaker arrays as described in this document.

Module System Working Load Limits

The above chart shows the Per-Point Working Load Limits for RoomMatch modules and accessories. To calculate the System Work-

ing Load Limit for the component, the per-point value is multiplied by the effective number of attachment points that contribute to load

bearing. While each module side plate requires 4 physical fastener connections (2 per side), the effective load is supported by only 2

connections per module (1 per side) due to the location of the centers of gravity and fastener locations. Therefore, the System Working

Load Limit of the full-range module is rated at: 2 x 1468, or 2936 lbs. This rating is identical for the RMS215 subwoofer with RMSFLY kit.

When the RMS215 subwoofer is suspended using the integral threaded inserts, the effective System Working Load Limit is 2 x 510, or

1020 lbs.

Page 8

Installation and Safety Guidelines

pro.Bose.com