Bose Videobar VB1 매뉴얼 - 페이지 32

{카테고리_이름} Bose Videobar VB1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Videobar VB1 47 페이지. Display mounting kit
Bose Videobar VB1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 자주 묻는 질문 (8 페이지), 중요 안전 지침 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Bose Videobar VB1 매뉴얼
Appearance
P R OD UC T D ETA I L S
Activity
A small bar of lights on the
leftmost end of the light
bar blinks once (white/on
if there is no active call; off
if there is an active call).
A small bar of lights on the
rightmost end of the light
bar blinks once (white/on
if there is no active call; off
if there is an active call).
A small section of lights in
the center of the light bar
is blinking white rapidly.
A small section of lights
in the center of the light
bar pulses white once and
then fades off.
A small section of lights in
the center of the light bar
is solid red.
A small section of lights in
the center of the light bar
are blinking amber.
White lights move
repeatedly between the
right and left ends.
  |  
3 2
E N
System State
The volume has been set
to its lowest level.
The volume has been set
to its highest level.
The VB1 is searching for a
Wi-Fi network.
The VB1 has connected to
a Wi-Fi network.
This also means the VB1
has detected a new audio
source connected to the
host USB port or Audio In.
The VB1 is not functioning
properly due to a
firmware/software issue.
Please contact Bose
technical support.
The VB1 is not functioning
properly due to a
connection issue. Make
sure the VB1 is connected
to a network.
The VB1 is downloading
and installing a firmware
update. Do not disconnect
the VB1 from its power
outlet or network. When
the update is complete,
the light bar will stop
moving, and the VB1 will
play an audio tone.