Bose Solo 15 series II 서비스 매뉴얼 - 페이지 36

{카테고리_이름} Bose Solo 15 series II에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Solo 15 series II 40 페이지. Tv sound system
Bose Solo 15 series II에 대해서도 마찬가지입니다: 중요 안전 지침 매뉴얼 (20 페이지), 자주 묻는 질문 (3 페이지)

페이지 인쇄

1. Tap Command Setup

Input Test (continued)

4.5 Apply a 200 Hz, 25 mVrms signal to the left

and right input of the A/D converter.

4.6 Connect the A/D converter Coax output to

the unit's Coax input.

4.7 Listen for clean, undistorted audio from the

unit.

4.8 Apply a 200 Hz, 25 mVrms signal to the left

and right input of the A/D converter.

4.9 Connect the A/D converter Optical output to

the unit's Optical input.

4.10 Listen for clean, undistorted audio from the

unit.

5. Auto Select

This is only needed if the input test is performed

with all inputs connected. Otherwise, the unit's auto

select circuit will select just the Optical input - the

highest performance signal. The auto selection

sequence is Optical, Coax, Analog.

5.1 Issue the TAP command "remote 0" to turn

the unit on, or press the remote ON button.

5.2 Issue the TAP command "VO 100" to set the

volume to maximum level.

5.3 Issue TAP command "audio auto, 0" to dis-

able auto input selection.

5.4 Apply a 70 Hz, 50 mVrms signal to the left

and right analog input.

5.5 Issue TAP command "audio input, 0" to se-

lect the Analog input.

5.6 Apply a 70 Hz, 50 mVrms signal to the left

and right input of the A/D converter.

FUNCTIONAL TEST PROCEDURES

5.7 Connect the A/D converter Coax output to

the unit's Coax input.

5.8 Issue TAP command "audio input, 1" to se-

lect the Coax input.

5.9 Connect the A/D converter Optical output to

the unit's Optical input.

5.10 Issue TAP command "audio input, 2" to

select the Optical input.

5.11 Perform Step 6 for pairing.

5.12 Issue TAP command "audio input, 3" to

select the Bluetooth input.

5.13 Issue TAP command "audio auto, 1" to

enable auto input selection before returning the

unit to the customer.

6. Bluetooth Test

For this test, use a Cell phone with A2DP Bluetooth,

such as an iPhone

Profi le) Pair Bose

system device.

6.1 Plug in the power to the unit and turn on the

Bose

Solo 15/10 Series II TV sound system

6.2 Press the Bluetooth button on remote until

the LED blinks white to make the unit discover-

able.

6.3 From the Bluetooth device list, select the

device named "Bose Solo system". Once paired,

the LED on the unit should turn a solid white.

Note: If you are prompted for a pass code, enter

0000.

6.4 Play a familiar audio track from the Bluetooth

device.

6.5 Listen for a clean undistorted sound with no

audio drop outs.

(Advanced Audio Distribution

Solo 15/10 Series II TV sound