advanced scale models Pitts Special 사용 설명서 - 페이지 6

{카테고리_이름} advanced scale models Pitts Special에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. advanced scale models Pitts Special 10 페이지.

STEP 15.

Clamp your engine to the mount ensuring that the front

of the prop driver is 130mm in front of the bulkhead.

Mark the engine mount though the engine's mounting

lugs as shown and remove the engine.

STEP 16.

Drill clearance holes in the engine mount for the

mounting bolts supplied. Connect three lengths of fuel

tubing to the tank then mount the engine.

STEP 17.

Prepare the throttle linkage by drilling a hole through the

front bulkhead as shown and fitting a pushrod

connector to the throttle arm. Mount your throttle servo

in the front of the pre-cut servo tray and use a wire

pushrod and clevis to complete.

STEP 18.

Now screw the three captive cowl retainers as shown.

Pilot drill the mounting holes first and use the self

tapping screws supplied.

_____ Page 6 _____