Bose FreeSpace ZA 2120-LZA 설치 및 운영 매뉴얼 - 페이지 23

{카테고리_이름} Bose FreeSpace ZA 2120-LZA에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace ZA 2120-LZA 48 페이지. Integrated / zone amplifiers

pro.Bose.com

Installation

For placement of the amplifier, keep the following in mind:

• Make sure that air can circulate freely from left to right for adequate ventilation. There are vents on the

sides.

• The temperature of the rack should be controlled to ensure that amplifiers are not exposed to ambient

temperatures exceeding 40° C (104° F).

• Do not cover or block amplifier vents.

• Do not place the amplifier in an enclosed space, such as a cabinet.

• Make sure the chassis is protected from heat and kept away from direct heat sources, such as heating

vents and radiators.

CAUTION: Do not allow the chassis to exceed the maximum operating temperature of 40°C

(104°F). Be aware of conditions in an enclosed rack that may increase the temperature above

room-ambient conditions. If the amplifier becomes too hot, it will go into a thermal protection

mode and mute all outputs.

FreeSpace® amplifiers are designed to fit standard 19-inch (48 cm) rack equipment, occupying 1 rack-

unit (RU) in height, requiring a mounting depth of 12.2 inches (30.9 cm) from the front rack rail. Use four

fasteners with washers (not supplied) to mount the amplifier front panel rack ears to the equipment rack

rails.

CAUTION: Only use the mounting hardware recommended by the rack manufacturer.

Rack-mount ears can be removed by removing the three screws from each rack-mount ear.

Figure 9. Removing the rack-mount ears

Installation

Installation Guide - 23