Bose FreeSpace ZA 2120-LZA 설치 및 운영 매뉴얼 - 페이지 24

{카테고리_이름} Bose FreeSpace ZA 2120-LZA에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace ZA 2120-LZA 48 페이지. Integrated / zone amplifiers

Installation

Placing on a Flat Surface

The amplifier can be placed on a flat, stable surface like a table, counter, or shelf. The rack-mount ears can

be removed and plastic feet (included with the amplifier) can be installed to protect the surface area and

prevent the chassis from sliding.

Note: When installing the amplifier in an office, conference room, or classroom, carefully place it in a way

that minimizes the audible affects of the internal cooling fan of the amplifier. It is recommended to place

the amplifier below ear level, in a corner, with the fan inlet (left side) pointing away from the seating area.

The included feet are comprised of two parts: a foot and a pin.

Place the amplifier upside-down on a flat, level surface on a protective covering to avoid scratching the

top of the chassis.

2. Insert the four feet into the four holes on the bottom of the chassis.

3. Insert a pin into the hole on the foot.

4. Press down on the pin until the foot locks into place. Repeat for all four feet.

Figure 10. Installing the feet into the bottom of the amplifier

One amplifier can be stacked on top of another when there is limited space available on a table, counter,

or shelf.

Figure 11. Stacking two FreeSpace amplifiers

24 - Installation Guide

pro.Bose.com