Bose FreeSpace ZA 250-LZ 설치 및 운영 매뉴얼 - 페이지 25
{카테고리_이름} Bose FreeSpace ZA 250-LZ에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace ZA 250-LZ 44 페이지. Rack mount kit for amplifiers
Bose FreeSpace ZA 250-LZ에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (22 페이지), 빠른 시작 매뉴얼 (2 페이지)
Setup and Operation
pro.Bose.com
Remote Control connections
Remote volume and source selection control
The amplifier is designed to work with the Volume Control with A/B Select User Interface (PC 041967) accessory� The
REMOTE connector on the rear panel of the amplifier is labeled to match the connector on the user interface� Use the
included 4-pin Euroblock�
Volume Control with A/B Select User Interface
See the Bose
Volume Control with A/B Select User Interface install guide for more details.
®
The amplifier also can be controlled with a linear taper 10k ohm potentiometer (full CCW=0 ohm, full CW=10k ohm) and
SPDT switch�
Volume Control with A/B Select
Note: The Bose Volume Control User Interface (PC 041966), not shown here, is not fully functional with the IZA 190-HZ
and IZA 250-LZ amplifiers�
Mute with standard contact closure
The amplifier is designed to mute all outputs (including AUX OUT) when a trigger is detected via the MUTE connector�
This is triggered from a standard contact closure� Use the included 2-pin Euroblock�
AC power connection
Once all the input and output connections have been made on the rear panel, connect the amplifier to AC power with
included power cord�
English
Installation and Operation
Page 25