Beckmann+Egle MD3060 사용 설명서 - 페이지 12
{카테고리_이름} Beckmann+Egle MD3060에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Beckmann+Egle MD3060 16 페이지.
페이지 인쇄MD3150/3060
MD3060 data format
Data is output in the following format:
Byte no.:
ASCII:
This means if the temperature is in the range between -65.0°C and 199.9°C (0.1°C
resolution), the output format is 13 characters long; if the temperature is in the range
between 200°C and 1150°C (1°C resolution), the output format is 12 characters long.
Example of output format:
TEM + 0123G C <cr><lf>
TEM - 045.6G C <cr><lf>
MD3150 temperature sensor pin configuration
Surface sensor:
Pierce sensor:
Y adapter:
The sensor connected can be either 1 surface sensor, 1 pierce sensor or
2 pierce sensors (via Y adapter).
For further details, please see the description of accessory items + application.
MD3060 temperature sensor pin configuration
Temperature sensor: NiCr-Ni / type K (yellow)
Thermo plug (yellow)
Legend in right figure:
weiß – white
grün - green
Copyright BECKMANN+EGLE GmbH, All rights reserved.
0
1
2
T
E
M
measuring range over 199.9°C; 12 characters
measuring range under 200°C; 13 characters
Plug: soldered end
8
7
6
5
4
3
2
1
Connects to channel 1 and channel 2
Connects to channel 1
If connection is not marked, channel 1 and channel 2 remain
connected 1:1, if marked red, channel 1 and channel 2 have
been mixed up internally (connection for second pierce sensor,
mains adapter, interface cable).
Thermo wires (white, green)
Page 12
3
4 - 8
+/-
meas. value
w. decim pt.
Sensor cable
1
Common channel
2
Channel1
3
Channel2
4
5
6
7
8
9
10
11
G
C
cr
0dh
NTC 2
NTC 1
Internet: www.bue.de
12
lf
0ah