Beckmann+Egle MD3060 사용 설명서 - 페이지 8

{카테고리_이름} Beckmann+Egle MD3060에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Beckmann+Egle MD3060 16 페이지.

MD3150/3060

Display interval-measured values.

Mode 4:

Mode display

Pressing the plus / minus keys displays the temperature values of the last-saved

series. The small display shows the memory location number and the large display

shows the temperature value at this location.

Holding the plus/minus key pressed automatically increments/decrements the

memory location number (auto-increment).

If an interval measurement is active (mode 3), mode 4 is skipped.

Display min, max, mean values

Mode 5:

Mode display

Pressing the plus key shows 0, 1, 2 in the small display.

The large display shows the appropriate minimum, mean and maximum, temperature

values. These memory entries are automatically deleted when the next interval

measurement is started (mode 3).

The above 3 values can be deleted manually with the minus key.

In this case the values -20°C , 0°C , +120°C (MD3150) resp. –200°C,0°C,1150°C

(MD3060) (measuring value limits) appear at these 3 locations.

Set trigger threshold

Mode 6:

Mode display

The trigger threshold (temperature value at which an interval measurement is started

when the set value is exceeded or undershot in mode 3) can be set with the

plus/minus key. To facilitate the setting, this setting has auto-increment feature (keep

key pressed).

Memory location no.

0 : Min, 1 : Mean, 2 : Max

Page 8

Small display

Large display

Temperature

Large display

T min , T mean , T max

Large display

Trigger threshold (temp.)

Internet: www.bue.de