Anntlent AN-CL70AV Plus 사용자 설명서 - 페이지 3
{카테고리_이름} Anntlent AN-CL70AV Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anntlent AN-CL70AV Plus 11 페이지. Cell phone signal booster
compliance.
Do not remove the covers during working.
Do not try to repair or replace any components inside of the equipment. Alteration
or abuse of the equipment or other components will void this product's warranty,
and could be dangerous to the user.
PACKAGE CONTENTS
(1) Packages include the following:
① 1Pcs AN- CL70AV Plus Booster with N Female connectors.
②AC/DC Power Adaptor.
③Screws Mounting Kits.
④User manual (this document).
(2) Booster interface description:
①LED light:
The corresponding LED on the right is used to indicate the following different
working conditions of the booster.
LED Indicator
LED LIGHT
②Power supply jack:
③INDOOR and OUTDOOR port:
antennas.
(3)Antennas and Cables:
In order to use the Booster, you still need the corresponding indoor antenna 1pcs,
outdoor antenna 1pcs, outdoor cable 1pcs and indoor cable 1pcs.
Antennas and cables kitting information are as follows
Booster working conditions
Continuous GREEN @normal;
Twinkly GREEN @input signals may be not enough;
Continuous YELLOW @ stronger input signals, AGC is working;
Twinkly YELLOW@ self–oscillation happen ,AGC is working.
Continuous RED@ power supply is shut down;
Twinkly RED@ self–oscillation happen but power supply is NOT shut down.
The booster uses a power input range of DC 5-12V.
The two ports are used to connect outdoor and indoor
3 / 11