Anova BRP122 조립 지침

{카테고리_이름} Anova BRP122에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anova BRP122 2 페이지. Ultra hoop bike rack extension ultra triangular bike rack extension

페이지 인쇄

anovafurnishings.com

888.535.5005 tel

tools needed

•

9/16" Open-end or Box-end Wrench

•

Ratchet with 9/16" Socket

Assembly HArdwAre:

8 x

3/8"

3/8" X 1.5"

Hex Nut

Hex Head Bolt

Assembly:

NOTE: Before assembling the Nuts to the Bolts, it is recommended that a light oil or petroleum jelly be applied to the Bolt threads.

1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.

2. Place the Inner Rack on the packaging cardboard or other soft surface. Position the Rack Center near one end of the Rack

Extension.

3. Align the mounting holes in the bracket on the Rack Center underneath the mounting holes at the end of the Rack Extension.

Install a Flat Washer onto one of the 1.5" long Bolts and insert the Bolt through both parts, with the Bolt head on the top surface

of the Inner Rack. Install a Washer and Hex Nut on the end of the Bolt.

Leave the hardware finger tight so that adjustments can be made.

Install a Bolt and Washer through the other set of mounting holes in that end of the Rack Extension and Rack Center bracket

and install a Washer and Nut. Tighten the hardware.

Assembly InstructIons

Ultra Hoop Bike Rack Extension

brP121

Ultra Triangular Bike Rack Extension

brP122

16 x

3/8"

Flat Washer

Packaging cardboard

or other soft surface

bencH comPonents:

1 x

Rack Center

Rack Extension

(Hoops or Loops)

Inner Rack

Flat Washer

Nut

Model BRP121 shown.

Inner Rack design may vary.

1 x

1.5" Long Bolt

and Flat Washer

Flat Washer

and Nut

Hex Head Bolt

Flat Washer

Rack End