Anova MIX2930R 조립 지침 - 페이지 3

{카테고리_이름} Anova MIX2930R에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anova MIX2930R 3 페이지.

Slide the stretcher into place making sure it's aligned with all four legs.

Place one 1/4" flat washer onto one 1/4"-20 x 1/2" button head socket cap

screw. Then insert the screw into the threaded boss as shown.

Use a 5/32" Allen wrench to tighten the four 1/4"-20 x 1/2" button head socket

cap screws.

Use a ratchet with a 7/16" socket to fully tighten each 1/4" Nylock nut. The

aprons are adjustable and should align with the legs.

10.

Tighten all four legs. Then carefully stand the table up right.

11.

After two weeks, retighten all the hardware.

NOTE: Pl ea se contact Customer Ca re a t 1-866-797-1761 to receive assistance in placing a replacement part order.

Threa ded Boss

Apron

7/17/2019

Manufactured in the U.S.

Stretcher

1/4"-20 x 1/2" Button Head

Socket Ca p Screw

Fl a t Washer