Anova CC251T 사용 설명서 - 페이지 11

{카테고리_이름} Anova CC251T에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anova CC251T 19 페이지.

Start of operation

ONE

: Adaptation for compost cutter

WARNING: only in case of stopped motor or static cut.

1.Raise the rear cover and remove the grass catcher.

two.Push the quilting wedge into the cover. Lock the quilting wedge with the button in the opening of the

cover. (Fig.6A/Fig.6B)

3.Replace the rear cover.

Fig.6A Fig.6B

TWO

: Reprogramming for side discharge mowing

WARNING: only when the motor and the cut are static.

1.Raise the rear cover and remove the grass catcher.

2. Mount the mulching wedge.

3. Raise side flap for side discharge. (Fig.7A)

4. Mount the side discharge discharge guide to the side flap support pin. (Figure7B)

5. Lower side flap, flap rests in discharge chute.(Fig. 7C)

Fig.7A Fig.7B Fig.7C

THREE

: Cut with the grass catcher

To mow with the grass catcher, remove the spreader wedge and side discharge chute and mount the grass

catcher.

1. Extraction of the subscriber wedge:

- Raise the rear cover and remove the spreader wedge.

2. Side Discharge Chute Extraction for Side Discharge:

- Lift the side flap and remove the side discharge chute.

-The side flap automatically closes the discharge opening in the housing by spring force.

-Regularly clean the side flap and the discharge opening forms from the rest of grass and adhering dirt.

3. Assembling the grass catcher:

-To fit: Raise the rear deck and hook the grass catcher onto the rear of the mower.

-To remove: Grasp and lift rear cover, remove grass catcher.