DS Produkte BG-F-0080 지침 - 페이지 2
{카테고리_이름} DS Produkte BG-F-0080에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DS Produkte BG-F-0080 4 페이지. Led light branches
페이지 인쇄EN
Dear customer,
We are delighted that you have decided on these LED light
branches. If you have any questions, contact the customer ser-
vice department via our website: www.dspro.de/kontakt
Explanations of Symbols and Signal Words
Danger symbols: Read through the associated
safety notices carefully and follow them.
Read the instructions.
Symbol for direct current
WARNING warns of possible serious injuries and danger to life
CAUTION warns of slight to moderate injuries
NOTICE
warns of material damage
Proper use
•
The product is suitable for use as an indoor decoration.
•
The product is not suitable for outdoor use.
•
The product is not a toy.
•
The product is for private household use only. It is not intended
for commercial applications.
•
Use the product only for the intended purpose and as described
in the instructions. Any other use is deemed to be improper.
SAFETY INSTRUCTIONS
■
WARNING – Risk of suffocation! Children and animals must
be kept away from the packaging material.
■
WARNING – Risk of chemical burn by battery acid! Batter-
ies can be deadly if swallowed. Do not leave small children un-
attended with the product. They could take out the batteries. If
a battery is swallowed, seek medical assistance immediately.
■
CAUTION – Risk of chemical burn by battery acid! If a bat-
tery leaks, avoid physical contact with the battery acid. Wear
protective gloves if necessary. If you touch battery acid, rinse
the affected area with abundant fresh water immediately and
seek medical assistance.
NOTICE – Risk of material damage and damage to
property
■
Only use the battery type specifi ed in the technical data.
■
Always replace all batteries. Do not use different battery types,
brands or batteries of different capacitances.
■
Take batteries out of the product when they are dead or if you
will not be using the product for a prolonged period. This will
prevent any damage if a battery leaks.
■
Immediately remove a leaking battery and clean the contacts.
■
Protect the product from: water or other liquids, moisture, heat,
direct sunlight and sub-zero temperatures.
■
The product must not be used if it exhibits visible damages.
■
Do not make any changes to the product and do not attempt to
repair it. In the event of any damage, please contact our cus-
tomer service department.
■
The individual LEDs cannot be replaced.
■
Do not in any case use any cleaners or rough sponges. They
could damage the surfaces. Dust the product off of, if soiled,
wipe it off with a damp, soft cloth.
DS Produkte GmbH • Am Heisterbusch 1 • 19258 Gallin • Germany
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
Product number: 04762
Items Supplied
•
1 x bunch of LED light branches with battery compartment
•
1 x remote control including 1 x 3 V button cell (CR2025)
•
1 x instructions
Check the items supplied for any transport damage. Do not use
the items if they are damaged, instead contact our customer ser-
vice.
In addition, three 1.5 V AA batteries are required.
Before Initial Use
1. Insert three 1.5 V AA batteries (not included) into the battery
compartment:
– Fold up the two locks of the battery compartment and open
the battery compartment.
– Insert the batteries. Ensure the correct polarity (+ / –).
– Close and lock the battery compartment.
2. Remove the insulating strip from the battery compartment of
the remote control to activate the battery.
3. Arrange the light branches as desired.
Use
The lights are controlled either via the remote control or the control
button on the battery compartment.
Press the control button repeatedly to switch the lights on and off
and to activate the desired lighting mode.
The remote control has an associated button for each function:
ON
OFF
Mode 1 – 8 Select lighting mode
DIM - / +
TIMER
If the power of the lights diminishes, replace the batteries.
Changing the remote control battery
4. Slide the battery compartment all the way back into the remote
control.
Technical Data
Product number: 04762
Model number:
Power supply
LED lights:
Remote control: 3 V DC (1 x 3 V button cell, CR2025)
Instructions ID:
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre.
Batteries should be removed prior to disposal of the product
and disposed of separately from the product at suitable col-
lection points.
This product is governed by the European Directive
2012/ 19 / EU on waste electrical and electronic equipment
(WEEE). Do not dispose of the product as normal domestic
waste, but rather in an environmentally friendly manner via
an offi cially approved waste disposal company.
Customer Service / Importer:
All rights reserved.
Switch the lights on
Switch the lights off
Decrease / increase brightness
The lights turn off automatically after 6 hours and
turn on again after 18 hours.
1. Turn the remote control upside
down with the buttons facing down.
2. The battery compartment is located
pull
on the narrow side of the remote
control. Remove it as shown.
3. Replace the empty battery with a
push
new battery (3 V, type CR2025).
BG-F-0080
4.5 V DC (3 x 1.5 V batteries, AA)
Z 04762 M DS V1 1118
✆
+49 38851 314650 *)
Instructions