aTTo Digital PoweREC 사용자 설명서 - 페이지 3
{카테고리_이름} aTTo Digital PoweREC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. aTTo Digital PoweREC 10 페이지.
aTTo Digital PoweREC에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지)
페이지 인쇄
How to use the PoweREC:
◆ Charging: Please connect the recorder to the PC or any USB power source to
charge it. When the device is charging, the blue light indicator keeps flashing.
The 4 blue led lights will flash intermittently during charging, indicating the
actual level of the battery. The recorder is fully charged when the lights stop
flashing and remain lit.
How long does it take to charge when battery is fully drained?
• using a 5V/2A output power (see the label of your charger) – 3 hours
• using a 5V/1A output power (see the label of your charger) – 6 hours
The PoweREC battery can last up to 380 hours on a full battery cycle.
NOTE! The recording function is available even when used simultaneously
as a power bank to charge other devices. However, due to power
consumption, the battery will drain faster than the 380 hours mentioned.
If the blue indicator light flashes during recording, it means the power is not
enough. The power indicator light will automatically go out after 40 seconds. To
shut it sooner, short press the power button twice.
When battery level is low you can connect the recorder to power source as it will
record and charge simultaneously.
Important: during recording, the removable disk icon will not appear on PC. To
access the partition, please TURN OFF the recorder.
◆ Time setting:
When you connect the power bank to your computer you will be able to access
its partition to find the folder RECORD.
In the folder RECORD, there is a text file named time.txt with the default time