ATV VD650WDR 사용 설명서 - 페이지 9

{카테고리_이름} ATV VD650WDR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATV VD650WDR 18 페이지.

OPERATING CAMERA

1) Auto(Auto White Balance) : AWB mode (1800ºK ~10500ºK)

2) Push/Hold : Push&Hold Mode.

 To find the Optimal setting for the current luminance environment in this mode,

set the direction towards a sheet of white paper and select Hold and press enter

button. If the environment changes, readjust it.

3) CRS Mode(Color Rolling Suppression) : Decrease color rolling effect.

 This operation take some time about 10 seconds and user can stop this

operation by pressing enter button.

 When CRS Mode is on, color tone can be weak.

4) Indoor : Set color temperature to indoor (3200ºK)

5) Outdoor : Set color temperature to outdoor (6300ºK)

6) FL(Fluorescent Light) : Set color temperature to fluorescent light fixed gain.

7) User(User Set White Balance) : Adjust red or blue gain.

 R(R-GAIN):Adjust R-GAIN value (0-255)

 B(B-GAIN):Adjust B-GAIN value (0-255)

1) SHT(s)(Electronic Shutter) : Select Shutter mode.

 Auto(1/60(1/50) ~ 1/100,000 Auto run, Manual 8 step from 1/60(1/50) ~1/10,000)

2) FLC(Flicker-less) : Flicker-less On/Off.

3) AGC(Auto Gain Control) : AGC Gain(Off, Low, Middle, High)

4) Sens-Up(Slow Shutter) : Maximum Low-Shutter select. (x2-x32 and Off)

5) Offset Add : Force the picture to turn up at low luminance environment.

1) Normal AE : BLC/WDR function off.

2) WDR(Wide Dynamic Range) : Wide dynamic range mode on.

3) EHLC(Excessive High Light Compensation) : EHLC mode on.

①

Enter Button

②

Up Button

③

Down Button

④

Left Button

⑤

Right Button

⑥

Spot Video Output

⑦

UTP(Optional)