Auber WS-1500DPMS 사용자 설명서 - 페이지 5

{카테고리_이름} Auber WS-1500DPMS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Auber WS-1500DPMS 8 페이지.

Figure 4. Sensor position. Left, the sensor should be placed close to the food but high

enough so that it does not touch the food. Right, hold the sensor in place by a piece of tape.

For the "Original" and Stainless Steel Bradley smoker, the Temperature Heat Control Switch

on the smoker tower should be slid to the Hi position (Most right).

For the Bradley Digital Smoker, the original sensor cable from the smoker should be

connected between the generator and smoker.

The controller is ready to power up.

3) The PID parameter for Bradley Smoker

This controller is shipped with parameters set for commercial rice cookers. You can try to use

the recommended PID parameters listed in Table 1. These are the parameters we obtain

from tuning the system manually.

Table 1: Recommended PID parameter for Bradley Smoker.

Symbol

Display

Bradley Smoker

This group of parameters is accessed by input code 166. Figure 5 is the flow chart that shows

how they can be changed.

600

150