AirTurn PEDpro 운영 매뉴얼 - 페이지 9

{카테고리_이름} AirTurn PEDpro에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTurn PEDpro 16 페이지. Hands-free bluetooth controller

Once connected, the blue LED will blink 1 time every 3 seconds.

IMPORTANT: Do not try to connect in MODE 1 and any other

MODE at the same time. MODE 1 only works in GATT MODE

and MODES 2-6 only work when connected directly through the

operating system setup. You must reset pairing to switch modes.

If you choose to use multiple apps in iOS, it is recommended to

use MODE 2 for both apps.

RESET PAIRING

Pairing must be reset whenever switching from one device to

another or when switching between MODES 1 and another mode.

Delete or forget the Bluetooth pairing from your host computer.

With the PEDpro powered on, press and hold the power button for

six seconds. After two seconds, the PEDpro will appear to power

down. Continue to hold the power button. At six seconds both

LEDs will blink three times. After the third blink release the

power button. The device has been reset. Turn on the PEDpro to

pair again with the desired host computer.

The PEDpro uses an idle timeout function to conserve power. After

two hours of inactivity when powered on and connected, the

PEDpro will power down automatically. The timer is reset when