Anzzi SB-AZ013WL 설치 및 운영 매뉴얼 - 페이지 10

{카테고리_이름} Anzzi SB-AZ013WL에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi SB-AZ013WL 14 페이지. Shower base
Anzzi SB-AZ013WL에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (8 페이지)

페이지 인쇄

STEP 2

Place the tray into the designated position

●

so that the Drain Body drops around the

Drain Pipe and put the Shower Base up

against the studs.

Level the tray and place marks on the studs

●

above the upper edge of the tile flange.

If the subfloor is not flat and level, use

●

leveling compound or mortar bed to

ensure that the base is level (shown in Step 5).

(Fig 2)

STEP 3

Drill 3/16" holes at all stud locations on top

●

flanges.(Fig 3)

IMPORTANT: Drill 3/16" clearance holes

into flanges only. Do not drill 3/16" holes

directly into studs. Drill chuck can damage

base. Use an extended bit holder to reduce

risk of drill chuck hitting base.

Fig. 2

Fig. 3