Anzzi SB-AZ013WL 설치 및 운영 매뉴얼 - 페이지 9

{카테고리_이름} Anzzi SB-AZ013WL에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anzzi SB-AZ013WL 14 페이지. Shower base
Anzzi SB-AZ013WL에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (8 페이지)

페이지 인쇄

ATTENTION

The following steps are for the rectangle

●

shower tray.

STEP 1

Ensure that the floor and the studs are at right angles.Provide a 5"×5" opening in the subfloor

●

for the drain. The 2" PVC waste pipe should extend above the surface of the sub-floor according

to the drain installation instructions and the height of the Shower Tray.

Mark unit position on floor and through drain opening.

●

Mark the locations of the studs on the flange of the base.

●

These marks are used to verify base location after drain is installed. (Fig 1)

●

The pipe height (A) shall be determined according to the products on hand.

●

(12.7 cm)