AIRVERSA Purelle 사용자 설명서 - 페이지 12
{카테고리_이름} AIRVERSA Purelle에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AIRVERSA Purelle 20 페이지.
페이지 인쇄Sleep Mode Button
Tap to turn Sleep Mode on/off
Sleep Mode operate quietly by using
a fan speed lower than low speed. It
will turn off the display after 10
seconds if no other buttons are
touched. When the display is turned
off, tap any button to turn the display
back on.
Fan Speed Button
Tap to cycle through fan speeds
Tapping the Fan Speed Button while
the air purifier is in Auto Mode will
exit that mode.
Filter Status Indicator
Press & Hold to reset filters
Blinks red when the filter should be
checked or replaced.
Press and hold for approx. 5s
to reset the Filter Status Indicator.
Network Indicator
Indicates pairing status
Product has been paired to the
network > Light stays on
Product has not been paired to the
network > Light will blink and then
turn off after 5 minutes each time
when the product is powered on.
Long press 10s to enter pairing mode.
Child Lock
Prevents current settings from
being changed
Press and hold for 5 seconds to turn
Display Lock on/off. The indicator will
blink 3 times along with 2 beeps
when any other button is tapped to
indicate that Display Lock is on.
Filter Life Indicator
Indicates filter consumption
Power Button
Tap to turn Purelle on/off
11