Abu Garcia C4 사용 설명서 - 페이지 3

{카테고리_이름} Abu Garcia C4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abu Garcia C4 6 페이지.

C. CLASSIC AMBASSADEUR® FAMILY OF ROUND REELS:

Packed with tradition, the ambassadeur series of round reels offers time tested performance and

durability. The family includes the Record, CS Pro Rocket Black Edition, Linecounter, C4 and

C3.

D. HOW TO FILL THE SPOOL WITH LINE

All ambassadeur round reels are designed for monofilament, braid and fluorocarbon lines.

Personal preference and fishing conditions will determine line selection. Begin by passing the

line through the guide located on the front of the reel. Secure the line to the reel using the arbor

knot. Control the filler spool by inserting a pencil into the spool hub. While maintaining tension

on the line with your fingers, wind the reel handle and continue to fill with line to approximately

1/16" (1.5 mm) below the top of the reel spool for best results. Do not overfill.

(CLICK HERE

learn how to tie the arbor knot in this video)

Braided Line

Some anglers prefer to add a monofilament backing to the reel spool before attaching braided

line. This helps reduce line slip. Using the above instructions, fill the spool with enough

monofilament line to cover the spool, approximately 10-15 yards. Tie the tag end of the

monofilament backing to the braided line using a uni-to-uni knot, Albright knot or equivalent.

Continue to fill the spool with braid to approximately 1/16" (1.5 mm) inside the upper lip of the

spool. Do not overfill.

E. DRAG ADJUSTMENT

Ambassader round reels are capable of up to 15 lbs of smooth and reliable drag tension. Control

the amount of drag by turning the adjustment star inside the reel handle. Rotate the star

clockwise (right) to increase drag or counterclockwise (left) to decrease drag. For best results

the drag should be adjusted to approximately one-third of the breaking test of the line being used.

This can be accomplished by tying the line to a spring scale for precise adjustment. Make sure

the reel is first mounted on a rod and the line has been run though the rod guides before tying to

the scale. The drag should always release before the line reaches its breaking point. Factors

such as line type, technique and fishing conditions may require adjustment to these

recommendations. Any drag setting above half of the line strength risks line breakage.