Abus Eyseo TV7220 설치 지침 매뉴얼 - 페이지 17

{카테고리_이름} Abus Eyseo TV7220에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus Eyseo TV7220 20 페이지. Progressive scan ccd network camera

For higher-quality pictures

For best video quality, set "Fixed quality" to "Detailled" or "Excellent" and the "Max frame rate" so that

it corresponds to the bandwidth of your network. If your network is slow and you get "broken" images,

go to the TCP protocol under Connection Type and select a more suitable transmission mode.

Pictures can also be affected by a time delay due to a slower connection. The more users in the

network, the greater this time delay.

For high frame rates with high-quality pictures

If you have a broadband network, set "Constant bit rate" to or higher and leave "Constant bit rate"

unchanged. You can also set the bandwidth according to the actual network speed or the frame rate.

Start with 30 frames per second and reduce this setting until you get the best performance. However,

do not reduce it to less than 15 frames per second. If the picture quality is not improved, select a lower

setting for "Constant bit rate".

Protecting the network camera with a password

Root password

The network camera is supplied with no password defined. Using this password, all users have access

to the network camera, including its configuration, as long as they know the IP address. If other users

are to have access to the network camera, you should therefore assign a password to the camera. To

activate protection, enter a new password. The administrator is identified with this password.