Abus Eyseo TV7220 설치 지침 매뉴얼 - 페이지 18

{카테고리_이름} Abus Eyseo TV7220에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus Eyseo TV7220 20 페이지. Progressive scan ccd network camera

Opening accounts for new users

Under "Configuration", select "Security". Now go to the "Add user" section.

Add an account with user name and password for a second user. You can define up to twenty

accounts for other users of the network camera. The camera checks only the access permission of the

corresponding user name and password. This means that two or more users can use the same

account at different levels.

Setting up a surveillance application

The administrator can use the built-in motion sensor for monitoring and signalling changes to the

picture. Snapshots of events can be sent to an e-mail address or to an FTP server. For this purpose,

settings have to be made under the configuration points "Network", "Motion sensor" and "Application".

For detailed information, see "System configuration".

You can download the latest software from the website www.abus-sc.com. A user-friendly update

wizard is provided for updating the network camera software (Installation Wizard / Upgrade). Only the

administrator can start the update function. To update the system:

1. Download the firmware file with the name xxx.pkg from the corresponding products folder.

2. Start the update wizard and follow the instructions.

3. The complete procedure finishes in a few minutes, and the system is automatically rebooted.

You can also update the software via the menu item Configuration / management of the network

camera.

If there is a power failure during the write process of the flash memory, the program in the

memory of the CMOS-network camera may be irreparably damaged. If the security network

camera cannot be correctly restarted following the update, consult your dealer's technical support.