AoFrio Network Pro ONE 설치 매뉴얼 - 페이지 2
{카테고리_이름} AoFrio Network Pro ONE에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AoFrio Network Pro ONE 16 페이지.
AoFrio Network Pro ONE에 대해서도 마찬가지입니다: 제품 설명서 (14 페이지)
페이지 인쇄Warnings
Please read the following warnings to maintain the safe operation and continued performance of the AoFrio
Network Pro.
Warnings
Installation
The Network Pro must be installed in accordance with
the instructions provided in the Network Pro Installation
Guide otherwise the warranty may be void. The Network
Pro must only be installed and configured by trained and
authorized staff.
USB-C port
Do not connect anything to the USB-C port. The port is
a non-standard USB-C and is only intended to be used
by AoFrio during manufacturing. Connecting anything to
this port may damage the product and void the product
warranty.
No serviceable parts
There are no serviceable parts inside the Network Pro.
Do not attempt to open the housing. Opening of the
electronics housing, altering, or modifying the Network Pro
will invalidate the warranty and damage the device.
Fit for purpose
The Network Pro must only be used for the purposes
and functions described in this manual. While AoFrio
may provide technical support on suitable applications
and configurations of the Network Pro (where such
a relationship may exist), no liability, responsibility or
risk is accepted in determining if the Network Pro is fit
for purpose for any particular application. No liability,
responsibility or risk is accepted by AoFrio for the
operational function of any particular installation
or configuration.
Continuous development
AoFrio undertakes to continuously develop and improve
products and services. The design and specification of
Network Pro and contents of this manual are subject to
change without notice. While every endeavour is made to
ensure that all specifications and documents are current
and complete, AoFrio accepts no liability, responsibility, or
risk due to omissions or changes caused by continuous
improvement and design changes.
Important do's and
don'ts:
•
Only authorised staff should install the
Network Pro.
•
Do not connect anything to the USB-C port.
•
There are no serviceable parts inside the
Network Pro.
•
Do not open the housing.
The Network Pro must only be used for the
•
purposes described in this manual.
•
The design and specification of the Network Pro
is subject to change and new firmware may be
released without notice.
1