Aolait AL350RX 사용자 설명서 - 페이지 17

{카테고리_이름} Aolait AL350RX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aolait AL350RX 17 페이지.

Cleaning

Cleaning schedules for lighting fixtures vary greatly depending on the operating

environment. Environmental factors that may result in a

need for frequent cleaning include:

• Use of smoke or fog machines.

• High airflow rates (near air conditioning vents, for example).

• Presence of cigarette smoke.

• Airborne dust (from stage effects, building structures and fittings or the natural

environment at outdoor events, for example).

If one or more of these factors is present, inspect fixtures within their first 100

hours of operation to see whether cleaning is necessary. Check again at frequent

intervals. This procedure will allow you to assess cleaning requirements in your

particular situation. If have any question,please contact dealer.

Use gentle pressure only when cleaning, and work in a clean, well-lit area. Do

not use any product that contains solvents or abrasives, as these can cause

surface damage.

Warning! Disconnect from power and allow to cool before cleaning.

To clean the fixture:

1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.

2. Vacuum or gently blow away dust and loose particles from the outside of the

fixture and the air vents at

the back and sides of the head and in the base with low-pressure compressed air.

3.Please use the professional cloth to clean the optical lens and soak with low

concentration detergent liquid.

Do not rub the surface hard: lift particles off with a soft repeated press. Dry with

a soft, clean, lint-free cloth or low-pressure compressed air. Remove stuck

particles with an unscented tissue or cotton swab moistened with glass cleaner

or distilled water.

4. Check that the fixture is dry before reapplying power.

Specifications subject to change without notice.

If have questions,please contact the dealer.