Aopos Anypos200 사용자 설명서 - 페이지 11

{카테고리_이름} Aopos Anypos200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aopos Anypos200 11 페이지.
Aopos Anypos200에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

Anypos

terminal.

The scanner is not

working

The screen is blank and

you don't hear any beeps.

Only the cursor appears.

Audio problems

Terminal is not working

at all

T erminal is frozen

Having the Anypos Serviced

If you are unable to solve the problem, you should have the Anypos

serviced. Pack the Anypos in the original carton. Include a description of

the problem and a checklist of the steps you took when trying to fix the

problem. The information may be useful to the service personnel. Return

the Anypos to the place you purchased it.

that the adapter LED is on. Otherwise， replace

the adapter

Check the scanner cable connection. Check

the scanner with another terminal to see if it

works. If the same problem occurs, replace the

scanner.

Check that the power cord is plugged into a

working electrical outlet. Check that the

power is on. (Press the power switch again for

confirmation.)

Reinstall the operating system, and power on

the Anypos.

Ensure the audio cable is not defective. The

mute is off.

Wait 30 seconds and try again.

If still not working – Reboot the terminal.

Otherwise, have the Anypos serviced..

Wait 30 seconds and try again.

If still not working – Reboot the terminal.

Otherwise, have the Anypos serviced.

Point of Service