Dunlop DL E MXR M 236 매뉴얼 - 페이지 2
{카테고리_이름} Dunlop DL E MXR M 236에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunlop DL E MXR M 236 2 페이지. Variac fuzz
페이지 인쇄
M236 SUPER BADASS
The Super Badass Variac Fuzz provides snarling,
aggressive tones thanks to a hot-rodded vintage
circuit. On top of that, it's got a Variac knob to
change up the voltage, so you can take your
fuzz from saggy "dying battery" sounds to high
headroom transparency.
1
CONTROLS
1 VARIAC knob controls
2
voltage level
2 TONE knob cuts high
frequencies
3
3 OUTPUT knob controls
overall effect volume
4 GAIN knob controls amount
4
of fuzz
5 FOOTSWITCH toggles
5
effect on/bypass (red LED
indicates on)
VARIAC FUZZ
®
DIRECTIONS
• Run a cable from your guitar to
the M236's INPUT jack and run
another cable from the M236's
OUTPUT jack to your amplifier.
• Set OUTPUT, GAIN, and VARIAC
controls to their 12 o'clock
positions, and set the TONE
control fully clockwise.
• Turn effect on by
depressing footswitch.
• Rotate GAIN knob clockwise
to increase amount of fuzz or
counterclockwise to decrease it.
• Rotate OUTPUT knob clockwise
to increase overall effect
5V
15V
volume or counterclockwise
to decrease it.
• Rotate TONE knob
counterclockwise to cut
high frequencies for a darker
fuzz sound.
• To simulate the voltage sag of a
dying battery, rotate the VARIAC
control counterclockwise. For
higher headroom and a clearer
and more transparent sound,
rotate the control clockwise.
VA R I A C F U Z Z
POWER
SPECIFICATIONS
The Super Badass Variac Fuzz
Input Impedance
is powered by one 9-volt battery
Output Impedance
(remove bottom plate to install),
Variac Range
a 9-volt AC adapter such as the
Noise Floor*
Dunlop ECB003, or the DC Brick
™
Current Draw
and Iso-Brick™ power supplies.
Power Supply
All specifications at 1 kHz
*A-weighted, all controls at mid position.
300 kΩ
120 kΩ
5 to 15 V
-98.5 dBV
17 mA
9 volts DC
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658