Abus TVAC31210 빠른 매뉴얼 - 페이지 8

{카테고리_이름} Abus TVAC31210에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus TVAC31210 19 페이지.

4.2 Installation suspended from the ceiling

Before starting:

The following points are prerequisites for installation:

At least 250 mm must be free above the ceiling.

The ceiling must be at least 5 mm and up to 40 mm in thickness.

The ceiling must be strong enough to bear more than 4 times the weight of the Speed Dome and its

accessories.

1. Turn the dome anti-clockwise to open it and remove it.

2. Remove the lens protector, the foam and the adhesive strips from the dome.

3. Then fit the dome back onto the Speed Dome.

Lens protector

4. Drill a hole in the ceiling using the drill template provided to help you.

5. Connect up all the cables required and switch on the power supply.

Then check the red power LED.

When the test is successful, switch off the power supply again.

Dome

Adhesive strips

English

Foam

Dome