AudioCodes Mediant 500L MSBR 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} AudioCodes Mediant 500L MSBR에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes Mediant 500L MSBR 8 페이지. Multi-service business router
AudioCodes Mediant 500L MSBR에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (6 페이지)
페이지 인쇄
Physical Description
3
4 5
1
2
[The number and type of port interfaces depend on the ordered hardware configuration.]
1
POWER
AC power plug entry
Power LED (located on the front panel):
Status LED (located on the front panel):
2
ON / OFF
Power button to switch on the device (when pressed in) and to switch off the
device (when pressed out).
3
CONSOLE
RS-232 serial interface port (RJ-45).
4
USB port, which you can use for various functionalities such as storing the
configuration file on an external USB hard drive.
5
//
Reset pinhole button for resetting the device or restoring it to factory defaults. To
restore the device to factory defaults: with a paper clip or any other similar
pointed object, press and hold down the button for at least 12 seconds (but no
more than 25 seconds).
6
S1 GE LAN
Up to four Gigabit Ethernet (10/100/1000Base-T) ports (RJ-45) for connecting IP
phones, computers, or switches. The ports support 1+1 Ethernet port redundancy
(active-standby), half- and full-duplex modes, auto-negotiation, and straight-
through or crossover cable detection.
Green On
Power received by device
Off
No power
Green On
Device is operational
Green Flashing
Initial rebooting stage or software upgrade (.cmp
file) in process
Red On
Boot failure
Off
Advanced rebooting stage
Green On
Ethernet link established
Green Flashing
Data is being received or transmitted
Off
No Ethernet link
2 |
6
P a g e