Abus TVHD40000 사용자 설명서 - 페이지 8

{카테고리_이름} Abus TVHD40000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus TVHD40000 11 페이지. Ir hd-sdi 1080p outdoor camera

6.3 Power supply

Before starting installation, ensure that the mains voltage and the rated voltage on the camera are

identical.

The camera is equipped with a 12 VDC power supply. Please observe the polarity when connecting

it. It should be connected by means of a mains adapter (circular connector, 5.5 mm x 2.1 mm).

In order to transmit the video signal from the HD-SDI camera to an HD-SDI converter/monitor or

HD-SDI recorder, you have to connect a type RG6 or RG59 coaxial cable with a BNC plug (male) to

the "Video-OUT" connection. The cable length to the next device may not exceed 80 metres (RG59)

/ 150 metres (RG6). You can use appropriate HD-SDI repeaters to increase the range.

To align the camera, use the spanner provided to loosen the fixing nut on the base plate of the

camera mount. To do this, turn the fixing screw in anti-clockwise direction.

You can now align the camera along 3 axes.

When aligning the camera, make sure to fasten the

fixing nut using the wrench provided.

TVHD40000

(1) Video signal (BNC)

(2) Power supply

12 VDC (5.5 x 2.1 mm)