Abus TVIP81000 빠른 매뉴얼 - 페이지 10

{카테고리_이름} Abus TVIP81000에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus TVIP81000 19 페이지.

4.3 Installation in the ceiling

Before starting:

The following points are prerequisites for installation:

The ceiling must be at least 5 mm and up to 40 mm in thickness.

The ceiling must be strong enough to bear more than 4 times the weight of the Speed Dome and its

accessories.

1. Removing the ceiling mount

The ceiling mount is attached to the indoor dome upon delivery. Before installing the Speed Dome in

the ceiling, the ceiling mount must be removed.

1.1 Undo and remove the four screws as shown in the following:

1.2 Fasten the four installation bolts.

2. Laying the cables

The cables can be guided into the Speed Dome from the top or from the side. If you wish to guide the

cables in from above, a hole needs to be drilled in the ceiling for the cables.

English