Danish Interpretation Systems DCS 6000 사용자 설명서 - 페이지 10
{카테고리_이름} Danish Interpretation Systems DCS 6000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danish Interpretation Systems DCS 6000 14 페이지. Digital conference system
Danish Interpretation Systems DCS 6000에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (18 페이지)
페이지 인쇄Danish Interpretation Systems
System Setup
General guidelines
Connect the RP 6004 to the various units using Cat
5 FTP or STP cables. Please observe the following
guide lines:
•
Maximum cable length in one chain is 200
m
without
interconnection cables between the units.
The max. usable cable length depends on
the units connected and length of feeding
cables etc.
•
Maximum cable length in one chain when
using repeaters is 680 m.
•
As the RP 6004 Repeater is repeating only
one of the four outputs A (A1 or A2) or B
10
repeater.
This
includes
Manual 01 18 04466 Printed in Denmark
(B1 or B2) the max. number of languages
configured on the four outputs (1, 2, 3 and
4) is totally max. 16.
If more languages are required, Interpreter
sets for those languages have to be
connected to both chains (A or B) on the
CU 6010. Normally the languages are
supposed to be divided equally on chains A
(A1 or A2) and B (B1 or B2).
•
If the last unit in one chain is a CS 6032
Channel Selector, this units has to be
terminated with an external termination, as
the CS 6032 does not have an internal
termination.
Appendix