Audionet AMP II MAX 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Audionet AMP II MAX에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audionet AMP II MAX 13 페이지.
Audionet AMP II MAX에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지)

Inputs and outputs

For connecting or removing any units the AMP II MAX must be

switched off.

Please make sure that all cables are in absolute best condition. Broken

shields or short-cut loudspeaker cables could damage your loudspeakers

or the amplifiers!

Inputs

At first please connect your pre amplifier to the inputs of your AMP II

MAX. For audio input you can use balanced (XLR) as well as unbalanced

(cinch) cables. For connections longer than 10 m we recommend bal-

anced cables.

Please don't forget to activate the selected input in the set menu.

Speakers

Now connect your speakers to one pair of the gold plated output jacks of

your AMP II MAX. You may use pure wires or "banana" plugs.

Check the polarization of the speakers cables:

Usually the speaker jacks are labeled "+" and "-". You will find the same

label at your AMP II MAX.

Wrong polarization will lead to severe loss of sound quality!

The speaker impedance must not be less than 4 W !

Though your AMP II MAX is effectively protected against shorted

speaker jacks it has to be switched off while working on speakers and

speaker cables!

Bi-Wiring

Your Audionet AMP II MAX supports bi-wiring of loudspeakers. Con-

nect your speaker with two separate cables to each AMP II MAX. Using

the bi-wiring method to connect your speakers can lead to enhanced

sound quality.