Audiophile APS PurePower 1050 사용자 설명서 - 페이지 10

{카테고리_이름} Audiophile APS PurePower 1050에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiophile APS PurePower 1050 19 페이지. 120 volt models audio power supply

페이지 인쇄

1. About the Purepower Aps

Installing optional Power Packs

Modules must be installed before powering the APS.

CAUTION:

A small amount of arcing may occur when connecting a PowerPack Module to the

APS. This is normal and will not harm you. Insert the connection cable into the APS battery con-

nector quickly and firmly.

· Plug the first PowerPack cable into the battery connector on the APS rear panel

· If additional PowerPacks are to be installed, plug the cable of the second cabinet into the

battery connector on the previous Powerpack

NOTE: The batteries charge to 80% capacity in approximately 2 hours. However, it is recommend-

ed that the batteries charge for 24 hours after installation or long-term storage. The battery

charging process will occur during normal operation and will not interfere with the supply of

power from the APS.

Audiophile Power Supply • www.audiophileaps.com

Installation

| 09