audiophony H11020 사용자 설명서 - 페이지 5

{카테고리_이름} audiophony H11020에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophony H11020 7 페이지.

UHF

4 - Emet-Body F5

0dB

INPUT

MIC

-10dB

1 - Jack 3.5 input to connect the microphone

2 - Input level selector. MIC is the standard configuration for the

3 - ON/STANDBY/OFF power switch. The middle position allows you

STANDBY

ANT

OFF

4 - Battery level indicator.

5 - Flexible antenna.

6 - Synchronisation IR diode. The ASC (Auto Synchro Connection)

7 - Batteries compartment: LR06 x 2. Please make sure you keep the

- 500 MH

headband microphone. You can switch to the 0dB or -10dB

positions if you want to use another type of microphone.

to cut the microphone without interrupting the HF signal.

- The indicator flashes in red when the batteries are discharged.

- The indicator flashes in red when the ASC function is activated.

function allows you to synchronise a chosen channel between the

transmitting microphone and the receiver via infrared transmission.

To do so, select a channel (from 1-16) on the receiver. Press the

ASC button and put the IR diode of your microphone in front of the

IR diode (#9) of the receive

same polarities if need to replace the batteries.

English