audiopraise VanityPRO 사용자 설명서 - 페이지 15
{카테고리_이름} audiopraise VanityPRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. audiopraise VanityPRO 19 페이지.
페이지 인쇄
Audio Meters
For quick overview of the audio signals presence and incoming audio signal levels, the
Vanity
PRO
features an 8-channel audio level meter. Each channel has a dedicated meter with the
range from 0dBFS down to -48dBFs and tri-colour grade. The channel names are coded with
standard abbreviations. The additional names in the brackets follow the naming convention of the
CEA-861-D standard.
FL – Front Left
•
FR – Front Right
•
C – (Front) Center
•
LFE – Low Frequency Effect
•
SL – Surround (Rear) Left
•
SR – Surround (Rear) Right
•
SBL – Surround Back (Rear Center) Left
•
SBR – Surround Back (Rear Center) Right
•
Audio Meters screen and prototype showing the colour-grading of the meters
System Status
This screen shows the overall system status, health, and operational parameters.
PRODUCT: This section shows the product related information, such as serial number, hardware
version and firmware (SW) version. Information from this section should be always provided when
support is required.
POWER: Shows internal voltage measurements of various
voltage rails and Audio side power input current.
AUDIO: Shows various audio parameters which are available
in the home screen as well as oscillator selection, oscillator
control voltage and audio buffer utilization.
HW: Shows internal health checks for the key components –
HDMI interface, FPGA, and the screen.
HDMI: Shows the ID information and status of the HDMI
interface.
Page 15 of 19
– User Manual v1.2
Vanity
PRO