AudioPressBox APB-112 OW-D-USB 소유자 매뉴얼 - 페이지 7
{카테고리_이름} AudioPressBox APB-112 OW-D-USB에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioPressBox APB-112 OW-D-USB 12 페이지. Press conference audio distribution amplifier
Operations
1.
Connect the APB to Dante network
with PoE capability
APB-112 OW-D-USB is a PoE Class 3
device, so it can be powered from a basic
PoE
2.
Make the Dante signal routing
APB is set by default to obtain IP
address from DHCP server.
In Dante network you will see the APB as:
APB112OW-D-USB-serialnumber. You can
change it in Dante controller software. In this
software you can also route the signal to APB
For more information about Dante controller set up click on the following link:
https://www.audiopressbox.com/pages/audiopressbox-apb-112-ow-d-usb-manual
3.
Set up the levels
Set up the output level on your source device
to reach the nominal output on APB – 0dB LED
on Output Level indicator. You can also set the
output level switch for each output as desired
– Mic or Line
4.
APB is ready to use!
7