AudioRealism Bass Line 사용자 설명서 - 페이지 6

{카테고리_이름} AudioRealism Bass Line에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioRealism Bass Line 18 페이지. A monophonic programmable synthesizer plug-in

Control Section

The control section is used to specify how ABL should operate.

The Midi Led will light when there is Midi activity sent to the plug-in. The plug-in

receives Midi information on all 16 channels.

The sync mode switch has two settings: Internal and Host. To change the settings click

on the switch and slide the mouse in the direction you wish to set the switch.

In Internal sync mode it is possible to set the tempo between 50 and 250 BPM

In Host sync mode the tempo control has no effect as the tempo is read from the

host, and cannot be altered from ABL.

The Midi Mode switch operates as the Sync switch. The two settings are:

PTN - Patterns are selected from Midi notes. Each Midi note corresponds to one

pattern, with the lowest possible note being pattern 0 (zero) and the highest note

pattern 127. A note on message will start a pattern and a note off message will

stop the pattern.

NOTE - Notes are played directly from the Midi notes and the internal sequencer

is disabled. This allows ABL to be played as normal synthesizer. If two notes

overlap then a slide will occur between those notes. If a note with velocity over

100 (default) is played then an accent will be activated.

The option menu is activated by clicking on the text or near the arrow. This menu allows

you to alter the way ABL functions.

Midi CC

Activate Midi learn

Emulation

Switch to 24dB filter

Switch to non-exact tuning Switching to non-exact tuning makes the oscillator out

Bass Line – User's Manual

Selecting this item will activate Midi learn and change the

item to Deactivate Midi learn.

The filter can be switched to 24dB/octave attenuation.

The number denotes the slope of the filter cutoff in

decibels per octave. The 18dB/octave filter (modeled

after the original Bass Line) has a brighter sound than

the 24dB filter.