AudioStak ProSwitch PRSW-RCA-PCB 매뉴얼 및 설치 매뉴얼 - 페이지 13
{카테고리_이름} AudioStak ProSwitch PRSW-RCA-PCB에 대한 매뉴얼 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioStak ProSwitch PRSW-RCA-PCB 20 페이지.
페이지 인쇄
one head unit and one pair of speakers can be selected at a time. When a head unit is selected, it is connected
to the Signal Bus for the Head Unit Group. When a speaker pair is selected, it is connected to Signal Bus for the
Speaker Pair Group. Finally, the Signal Bus connection between these two Groups connects the selected head
unit to the chosen pair of speakers.
Figure 11 shows a sample system for eight head units and eight speaker pairs. Power, COMM and button wiring
are not shown for simplicity. Head Units are set as Component Group #1, and Speakers are set as Speaker
Group #1. Note that Speaker Groups and Component Groups are handled separately by ProSwitch systems,
Head Unit Group
Head Unit 1
Head Unit 3
SIGNAL BUS
Head Unit 5
Head Unit 7
SIGNAL BUS
Figure 11: Eight Head Units and Eight Speaker Pairs
Overview – Signal Bus
C B M
GROUP
BOARD
Head Unit 2
Head Unit 4
C B M
GROUP
BOARD
Head Unit 6
Head Unit 8
SIGNAL BUS
Speaker Group
Speaker Pair 1
Speaker Pair 3
Speaker Pair 5
Speaker Pair 7
C B M
GROUP
BOARD
Speaker Pair 2
Speaker Pair 4
SIGNAL BUS
C B M
GROUP
BOARD
Speaker Pair 6
Speaker Pair 8
SIGNAL BUS