Audiotec Fischer MATCH UP C42MB-FRT 매뉴얼 - 페이지 9

{카테고리_이름} Audiotec Fischer MATCH UP C42MB-FRT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiotec Fischer MATCH UP C42MB-FRT 17 페이지. Upgrade speaker systems for mercedes vehicles

페이지 인쇄

1. Installation

Congratulations!

Dear Customer,

Congratulations on your purchase of this high-

quality MATCH speaker system.

This system highlights best quality, excellent manu-

facturing and state-of-the-art technology.

Thanks to more than 30 years of experiences in

research and development of audio products this

speaker system generation sets new standards.

General instructions

General instructions for MATCH UPGRADE

speaker systems for Mercedes vehicles

The MATCH UPGRADE speaker systems for

Mercedes vehicles are semi-active speaker sys-

tems. Therefore it is mandatory to use an amplifier

to drive these speakers (e.g. MATCH UP 7DSP).

When using the midrange speakers ( UP S4MB-FRT,

UP X4MB-FRT, UP S4MB-SUR, UP S4MB-CTR)

we recommend to use a highpass filter of 150 Hz /

12 dB and for the subwoofers (UP W8MB-S4) a

lowpass filter of 150 Hz / 12 dB.

General installation instructions for MATCH

components

To prevent damage to the speakers and possible in-

jury, read this manual carefully and follow all instal-

lation instructions. This product has been checked

for proper function prior to shipping and is guaran-

teed against manufacturing defects.

For a proper performance and to ensure full war-

ranty coverage, we strongly recommend to get this

product installed by an authorized MATCH dealer.

We wish you many hours of enjoyment with your

new MATCH speakers.

Yours

AUDIOTEC FISCHER Team

General

instruction

speaker systems

The method of installation chosen and level of ex-

ecution will effect the overall performance of the

speaker system. Treat each installation step with a

high degree of attention.

We strongly recommend that you operate the com-

plete audio system at low volume before final in-

stallation. This will allow a trial listening test before

securing the loudspeakers into their mounting loca-

tions.

Install the cabling in a manner which precludes any

danger of the leads being exposed to shear, crush-

ing or rupture forces. If there are sharp edges in the

vicinity (e.g. holes in the bodywork) all cables must

be cushioned and protected to prevent fraying.

Make sure that all speaker wires easily reach the

speaker terminals without stress on the wire or con-

nectors.

Once you have tested the complete speaker

system and have confirmed correct operation, turn

the audio system off and prepare the loudspeaker

for final mounting.

Further installation guides at

www.audiotec-fischer.com

for

installing

MATCH